볼 수 없는 것
There are many RS-232 devices that are used in industrial applications. Nowadays, it has become important to link all these RS-232 devices together for automation purposes and for extracting information. Usually, those RS-232 devices are at a distance from the host PC and may be widely distributed throughout the factory. Consequently, it is not a good idea to use multiple serial cards to connect all these RS-232 devices together. The tM-752N can be used to link multiple distributed RS-232 devices using a single RS-485 network. The RS-485 is renowned for its easy maintenance, simple cabling, stability, reliability and low cost.
The tM-752N series supports the DCON protocol (compatible with I-752N series), allowing users to modify the settings of the module, such as the serial port configuration and the operation mode, etc. The module also has a built-in web server which provides an intuitive web management interface that simplifies the configuration of the module.
The tM-752N series module is equipped with a 1 KB queue buffer for its local RS-232 device. All data can be stored in the queue buffer until the host PC has time to read it. This feature allows the host PC to link to many low-speed RS-232 devices without suffering any data loss, and also makes it easier for baud rate converter applications to be implemented.
The built-in Self-Tuner ASIC on an RS-485 port can automatically detect and control the send/receive direction of the RS-485 network. Consequently, there is no need for application programs to be concerned with direction control of the RS-485 network.
Most RS-232 devices don’t support device addressing. The ICP DAS tM-752N series module assigns a unique address for each RS-232 device installed. When a command with a device address is sent to the RS-485 network, the destination tM-752N module removes the address field, and then passes the commands to the specified local RS-232 device. The response from the local RS-232 device will be returned to the host PC via the tM-752N.
▪ RS-232/485 시리얼 장치 통합
▪ 고성능 32-bit MCU 포함
▪ 10/100 Base-TX 이더넷, RJ-45 x1 (자동 협상, 자동 MDI/MDIX, LED 표시기)
▪ 중복 전원 입력 포함 : PoE 및 DC 잭
▪ 자동 RS-485 방향 제어 기능 제공
▪ 장치 검색을 위한 UDP 응답기 포함
▪ 이더넷을 통해 쉬운 펌웨어 업데이트 지원
▪ 구성용 tiny web server 포함
▪ 손쉬운 배선을 위한 터미널 블록 커넥터
▪ 초소형 폼 팩터 및 저전력 소비
▪ RoHS 준수 및 무 할로겐
▪ 적은 채널 수로 비용 효율적
|tM-7521 CR||Tiny Addressable 시리얼 컨버터, PoE, 1x RS-232 & RS-485 포트 (RoHS) CA-002 케이블 포함|
|tM-7522 CR||Tiny Addressable 시리얼 컨버터, PoE, 2x RS-232 & RS-485 포트 (RoHS) CA-002 케이블 포함|